- Published on
A client once asked me why her family room still felt squat and dark after all new furniture. The answer was hanging right there on the walls: her curtain rods sat directly on top of the window frames, exactly as wide as the windows, and the panels hovered an inch above the floor. We did not buy a single new piece of furniture. We moved the rods up and out, and the whole room changed.
That fix has a name in my studio: the high and wide formula. If you are wondering how high to hang curtains, this is the answer I give every client, and it works in nearly every room.
Image above: curtain design guides by Jill Seidner Interior Design on Pinterest
The high and wide curtain formula
The formula is four rules, and the graphic above shows all of them at once. Mount the rod above the window frame, not on it. Extend the rod well past the frame on both sides. Hang panels long enough to reach the floor. And when the curtains are open, the stack of fabric should rest mostly on the wall, not on the glass. Higher, wider, fuller: get those three right and even ready-made panels look custom.
How high to hang the curtain rod
The short answer: at least 4 to 6 inches above the top of the window frame, and closer to the ceiling when you can. Here is how I place it. Measure from the top of the window trim to the ceiling, or to the bottom of the crown molding. The sweet spot for the rod is about halfway between the frame and the ceiling. On a standard 8-foot ceiling that often puts the rod within a few inches of the ceiling line, which is exactly what you want. If you have crown molding, stop 2 to 3 inches below it so the finials do not fight the trim.
With tall ceilings, 9 feet and up, hanging the rod 8 to 12 inches above the frame is enough. You do not need to chase the ceiling all the way up; you just need clear space between the frame and the rod. One more placement rule: never mount the rod on the window trim itself. Trim-mounted rods chop the window visually and leave no room for the panel to clear the glass.
How wide to hang the curtain rod
A rod that matches the window width forces the open panels to cover the glass. Extend the rod 6 to 12 inches past the frame on each side instead. For a wide window or heavy fabric, plan up to a third of the window's width on each side, so the whole stack parks on the wall. This does two things: it lets every bit of daylight through when the curtains are open, and it makes the window read a foot or more wider than it really is. In a small room that trick alone is worth the effort. Measure for the rod before you buy panels: window width plus 12 to 24 inches is the rod length you want, and most adjustable rods cover this easily.
Curtain length: measure to the floor
Panels should touch the floor. I aim for what tailors call a kiss, where the hem just grazes the carpet or wood. A half-inch break reads relaxed; more than an inch or two of puddling is a deliberate, formal look, so only do it on purpose. Measure from the rod position down to the floor, and if you are using rings with clips, measure from the bottom of the ring, not the rod itself. That one detail accounts for most too-short curtains.
A few buying notes from years of specifying panels. Standard lengths are 84, 96 and 108 inches; with an 8-foot ceiling and a high-mounted rod, 96-inch panels are usually the right buy. Buy long and hem if you must, because a panel that floats above the floor looks like it shrank in the wash. Sill-length curtains are fine where the floor is not an option, like over a radiator, behind a sink, or in a child's room. Everywhere else, go to the floor.
How full should curtains be
Fullness is the part people skip, and it is what separates custom-looking windows from flat sheets of fabric. For a gathered look, the combined flat width of your panels should be 2 to 2.5 times the width of the rod span you are covering. For stationary side panels you can get away with less, but never hang a single narrow panel per side and expect it to drape. Quick math for a standard window: a 50-inch window with the rod extended to 74 inches needs about 150 inches of flat fabric for a full look, which means two or three 50-inch panels per side, or one extra-wide panel pair.
Hanging curtains FAQ
How high above a window should curtains be hung?
Mount the rod at least 4 to 6 inches above the window frame, or roughly halfway between the frame and the ceiling. On most 8-foot ceilings that lands the rod close to the ceiling line, which makes the whole wall feel taller.
How far should a curtain rod extend past the window?
Plan on 6 to 12 inches past the frame on each side. The goal is for the open panels to stack on the wall, leaving the glass clear.
Should curtains touch the floor?
Yes. In living rooms, dining rooms and bedrooms, panels should kiss the floor or break by no more than half an inch. Save shorter lengths for radiators, kitchens and kids' rooms.
Want help with your room?
Want a designer to plan your window treatments, layout and finishes with you? See My Online Design Services
Prefer to sketch it yourself? Start with my ready-to-use layout templates. Get the Drawing & Layout Library